Cisco Catalyst 8300 Series Panduan Pemasangan Perangkat Keras - Halaman 41

Jelajahi secara online atau unduh pdf Panduan Pemasangan Perangkat Keras untuk Perangkat Keras Jaringan Cisco Catalyst 8300 Series. Cisco Catalyst 8300 Series 46 halaman. Edge ucpe

Halaman Cetak

Install and Upgrade Field Replaceable Units

Note

SSD 2.5" Drives

Note

1. Remove the blank in the SSD slot

2. Install the drive into the slot and push forward until the drive seats in the connector

3. To secure the drives in the chassis, secure the screws on each side of the drive face

Figure 3: Installing the SSD 2.5" drives

Replace (Remove and Install) Fan Tray

1. Remove the top cover.

2. Remove the two screw that secure the fan tray in the chassis.

Keep the drive bays covered when there are no drives installed in the slot

The drive bays are in the front panel of the device. The bays are closed with a cover if there are no drives in

the slots.

Screws

SSD 2.5" Drives

Cisco Catalyst 8300 Series Edge uCPE Hardware Installation Guide

Replace (Remove and Install) Fan Tray