Cisco Catalyst 8300 Series 하드웨어 설치 매뉴얼 - 페이지 41

{카테고리_이름} Cisco Catalyst 8300 Series에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Catalyst 8300 Series 46 페이지. Edge ucpe

Install and Upgrade Field Replaceable Units

Note

SSD 2.5" Drives

Note

1. Remove the blank in the SSD slot

2. Install the drive into the slot and push forward until the drive seats in the connector

3. To secure the drives in the chassis, secure the screws on each side of the drive face

Figure 3: Installing the SSD 2.5" drives

Replace (Remove and Install) Fan Tray

1. Remove the top cover.

2. Remove the two screw that secure the fan tray in the chassis.

Keep the drive bays covered when there are no drives installed in the slot

The drive bays are in the front panel of the device. The bays are closed with a cover if there are no drives in

the slots.

Screws

SSD 2.5" Drives

Cisco Catalyst 8300 Series Edge uCPE Hardware Installation Guide

Replace (Remove and Install) Fan Tray