Cisco CES E1 BNC Panduan Konfigurasi - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Perangkat Keras Jaringan Cisco CES E1 BNC. Cisco CES E1 BNC 12 halaman. Cabling and configuring the ces port adapter modules

Halaman Cetak

This equipment uses USOC jacks as listed in Table 8-1:

Table 8-1

Model Name

WAI-T1C-4RJ48

Overview of the CES Port Adapter Modules

The circuit emulation service (CES) T1 and E1 Port Adapter Modules (see Figure 8-1) are

ideal for links that require constant bit rate (CBR) services such as interconnecting PBXs,

time-division multiplexers, and video conference equipment over campus, public, or

private networks. The four ports on the PAM can be conﬁgured as redundant links using the

switch's routing protocols. The T1 PAMs support UTP connectors and the E1 PAMs

support either twisted-pair, STP, or 75-ohm BNC connectors. Status and carrier detect

LEDs on each port give quick, visual indications of port status and operation. For detailed

network management support, comprehensive statistics gathering and alarm monitoring

capabilities are provided.

USOC Jacks for CES Port Adapter Modules

Facility

Service Order

Interface Code

Code

04DU9-BN

6.0N

04DU9-DN

6.0N

04DU9-1KN

6.0N

04DU9-1SN

6.0N

04DU9-1ZN

6.0N

Cabling and Configuring the CES Port Adapter Modules 8-3

Overview of the CES Port Adapter Modules

Jack Type

N/A