Cisco CES E1 BNC 구성 매뉴얼 - 페이지 3
{카테고리_이름} Cisco CES E1 BNC에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco CES E1 BNC 12 페이지. Cabling and configuring the ces port adapter modules
This equipment uses USOC jacks as listed in Table 8-1:
Table 8-1
Model Name
WAI-T1C-4RJ48
WAI-T1C-4RJ48
WAI-T1C-4RJ48
WAI-T1C-4RJ48
WAI-T1C-4RJ48
Overview of the CES Port Adapter Modules
The circuit emulation service (CES) T1 and E1 Port Adapter Modules (see Figure 8-1) are
ideal for links that require constant bit rate (CBR) services such as interconnecting PBXs,
time-division multiplexers, and video conference equipment over campus, public, or
private networks. The four ports on the PAM can be configured as redundant links using the
switch's routing protocols. The T1 PAMs support UTP connectors and the E1 PAMs
support either twisted-pair, STP, or 75-ohm BNC connectors. Status and carrier detect
LEDs on each port give quick, visual indications of port status and operation. For detailed
network management support, comprehensive statistics gathering and alarm monitoring
capabilities are provided.
USOC Jacks for CES Port Adapter Modules
Facility
Service Order
Interface Code
Code
04DU9-BN
6.0N
04DU9-DN
6.0N
04DU9-1KN
6.0N
04DU9-1SN
6.0N
04DU9-1ZN
6.0N
Cabling and Configuring the CES Port Adapter Modules 8-3
Overview of the CES Port Adapter Modules
Jack Type
N/A
N/A
N/A
N/A
N/A