ACU-RITE SENC 150 Panduan Instalasi

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Konverter Media ACU-RITE SENC 150. ACU-RITE SENC 150 8 halaman. Chevalier fsg-2a 1224 surface grinder cross feed “x” axis
Juga untuk ACU-RITE SENC 150: Panduan Referensi (20 halaman), Panduan Instalasi (4 halaman), Panduan Instalasi (6 halaman), Petunjuk Manual (12 halaman)

Halaman Cetak

SENC 150

Longitudinal Installation ...

Supplied with encoder hardware

**Supplied with center support hardware

Mounting Information...

These are application instructions for mounting the

longitudinal "X" axis SENC 150 encoder.

Before proceeding:

Please read the instructions completely.

Mount X axis prior to installing the cross feed.

Insure that the correct length encoder is being used

for the total axis travel.

Keep the reading head centered during installation.

Clean the mounting surfaces.

Save the alignment brackets with the Encoder

Reference Manual after installation is completed.

First Steps ...

Machine

Move the table to its center of travel.

Mark the axis so that it can be re-centered easily.

Move the saddle completely forward on the knee.

P.N. 385072-208 Ed B 2/06

Encoder Installation Manual For: Vertical Knee Mill

Stop

Reading head bracket

* 1/4-20 x 1" BHCS (2)

Encoder

Unpack encoder in a safe, convenient location.

Do not remove the reading head alignment

brackets until instructed.

Center reading head ...

•

Slide the reading head and brackets along the scale

case until the center marks on the scale case and

reading head are aligned.

Installation Manual 385072-38

Longitudinal X Axis on Rear of Table

5/16-18 x 3/4" SHCS

Encoder

** Center support

* 8-32 x 5/8" SHCS

(2)

1/4" Heavy flat washer

(2) .09" thick

Alignment bracket (2)

* M6 Flat washer (2)

.017" thick

** M6 Flat washer

.017" thick

** 1/4-20 x 3/4" BHCS

1/4-20 x 3/4" BHCS (2)

Align

center

marks

Acu-Rite Companies Inc.