Digitone proseries blocker Panduan Pengoperasian - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Ponsel Digitone proseries blocker. Digitone proseries blocker 17 halaman. Automatically blocks and routes screened calls with caller id
Halaman Cetak
when the prompt for "Enter Code" displays enter 58, display shows function. To return to the default
mode when the prompt for "Enter Code" displays, enter 59.
"Unknown or Anonymous"
Out of Area, Private and X
Code 72
If you want to have an answer machine or your voice mail to take these types of calls and not ring your
phone connected to the DPB you can program in Code 72 (OPX override). Note that Code 72 allows the
OPX calls through to the Line only, not the TEL phone port.
To enable OPX Override, enter
programming: press and hold the Program Button for 3 seconds until you see "Program Mode", then
"Pick Up Phone", when the prompt for "Enter Code" displays enter 72, display shows function. If you
want to restore Blocking of OPX calls later, enter programming: press and hold the Program Button for 3
seconds until you see "Program Mode", then "Pick Up Phone", when the prompt for "Enter Code"
displays, enter 73, display shows function.
"Private" Call Pass Thru Code 74
Using Code 74 can allow "Private" type calls with No Number displayed to ring through to the TEL phone
port while still blocking Out of Area and stored numbered calls. To enable Private Call Pass Thru, enter
programming: then enter 74, when "Enter Code" displays. To turn this feature Off, when the prompt for
"Enter Code" displays enter 75, display shows function.
"Out of Area" Call Pass Thru Code 76
Using Code 76 can allow "Out of Area" type calls with No Number displayed to ring through to the TEL
phone port while still blocking Private and stored number calls. To enable Out of Area Call Pass Thru,
enter programming: then enter 76, when "Enter Code" displays. To turn this feature Off, when the
prompt for "Enter Code" displays enter 77, display shows function.
PBX Extension Pass Thru Code 78
Using Code 78 can allow a PBX system that uses 1 to 6 digit extension numbers to pass through the DPB
without being hungup on as a OPX type call. Code 78 overrides this function and extension ringing is
possible while still blocking Out of Area, Private and Anonymous calls. To enable PBX Pass Thru, enter
programming: then enter 78, when "Enter Code" displays. To turn this feature Off, when the prompt for
"Enter Code" displays enter 73, display shows function.
After Hours Mode - Programmable Time Feature Introduction
During a certain time of the day or night you can set the DPB to enter into After Hours Mode. This mode
is designed to keep phones connected to the TEL phone port from ringing and allow calls to be answered
by an optional answer machine when it is enabled on a daily basis. If you run a business, then you
would use this After Hours Mode so all callers can leave a message. If your work or dinner times are
different from regularly scheduled times, you would use this mode so that you can get your sleep or to
completely avoid disruptive callers. During After Hours Mode, VIP callers can ring through at any
time regardless of the After Hours time settings. Invited callers can only ring through normally when
After Hours Mode is not enabled.
To use the After Hours Mode, you must first understand military time presented here. The clock on the
DPB display converts the telephone company's supplied clock data into either AM or PM time. If the
morning hours are 1:00am = 0100 hours, etc. until noon = 1200 hours and then the afternoon hours are
1:00pm = 1300 hours, etc. until midnight = 0000 hours. For example, to set a time for hours beginning
in the evening until the next morning: 4:54pm to 6:45am you would use the military time of 1654 (Code
82 1654) and 0645 (Code 83 0645) as the two numbers for your After Hours settings. To set a time for
early morning until lunch time or 1:00am to 12:00pm you would use 0100 and 1200.
After Hours Mode Settings
Step 1) Monday thru Friday – Start Code 82 & End Time Code 83
Using military time as shown above, set this feature on by enter programming: press and hold the
Program Button for 3 seconds until you see "Program Mode", then "Pick Up Phone", when the prompt
9