Digitone proseries blocker Panduan Pengoperasian - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Ponsel Digitone proseries blocker. Digitone proseries blocker 17 halaman. Automatically blocks and routes screened calls with caller id
Halaman Cetak
the TEL phone port except those you want to block. This mode also works with your phone company's
voice mail but also blocks those phone numbers you have entered into the Blocked Callers List. Blocked
callers will be immediately answered and after eight seconds get hung-up on. To enable this Mode,
press and hold the Program Button for 3 seconds until you see "Program Mode", then "Pick Up Phone",
when the prompt for "Enter Code" displays enter 31, display shows function.
Standby Mode = Code 32
In Standby, the TEL phone port will be connected directly to the telephone line and phones connected
there will ring. This feature allows you to leave the DPB off whenever you like without disconnecting the
device and the red LED will blink slowly. To enable this Mode, press and hold the Program Button for 3
seconds until you see "Program Mode", then "Pick Up Phone", when the prompt for "Enter Code" displays
enter 32, display shows function.
Select Mode = Code 33
In Select Mode, you can enter only the callers you want to ring through to your phones connected
to the TEL Port while all others can ring your voice mail service or a separate answer machine in parallel
with the DPB. Note: You must enter numbers into the Invited or VIP Lists to receive calls. This
mode allows the LINE to ring for all callers with valid phone numbers and are subject to OPX Code
blocking. Also with After Hours Mode enabled, only VIP callers can ring through. Blocked callers will
be immediately answered and after eight seconds, get hung-up on. To enable this mode, press and hold
the Program Button for 3 seconds until you see "Program Mode", then "Pick Up Phone", when the prompt
for "Enter Code" displays enter 33, display shows function.
Outgoing Call Blocking Code 42
The DPB can block outbound dialed numbers (up to 10 entries) by phones connected through the TEL
port. To store a number you want to stop from being called, press and hold the Program Button for 3
seconds until you see "Program Mode", then "Pick Up Phone", when the prompt for "Enter Code" displays
enter 42, followed by the number you want blocked from dialing out and then * key to store it. Display
shows function. Extension phones are not affected by blocking. However, any cordless phone handsets
that are connected to the cordless base through the TEL port, will be blocked.
(Virtual Memory Feature)
Blocked Number List Auto Delete Code 46
The DPB can manage your blocked calls list automatically with First In and First Out processing. With
1,000 memory slots available to block calls, it will be daunting to sort through them line by line.
However, the DPB can use virtual memory by allowing the first calls that may have come in years ago to
be deleted automatically upon the reception of newer calls today. To enable this mode, press and hold
the Program Button for 3 seconds until you see "Program Mode", then "Pick Up Phone", when the prompt
for "Enter Code" displays enter 46, display shows function. To return to the default Manual delete mode
when the prompt for "Enter Code" displays, enter 47.
Block Private Name Code 48
The DPB can block the name Private with or without a phone number. Even though you may have
Anonymous Call Rejection from your phone company, scammers can still get through just by adding a
spoofed number, even your own. However, the DPB will block these calls that display the name as
Private with or without a phone number. To enable this mode, press and hold the Program Button for 3
seconds until you see "Program Mode", then "Pick Up Phone", when the prompt for "Enter Code" displays
enter 48, display shows function. To return to the default mode when the prompt for "Enter Code"
displays, enter 49.
Block Out of Area Name Code 58
The DPB can block the name Out of Area with or without a phone number. Scammers can get through
by adding a spoofed number, even your own, when calling in Out of Area. However, the DPB will block
these calls that display the name as Out of Area with or without a phone number. To enable this mode,
press and hold the Program Button for 3 seconds until you see "Program Mode", then "Pick Up Phone",
8