Digitrax UT4 Series Buku Petunjuk - Halaman 4

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Pengontrol Digitrax UT4 Series. Digitrax UT4 Series 4 halaman.

To Select, Dispatch or Steal another loco you must plug the throttle back into a

LocoNet port.

Turning the UT4 Off

The UT4 has a 'sleep' mode. To turn the unit off, simply press and hold any

function key down and turn any address selector to the next digit. The throttle

will then go into deep sleep mode. The UT4 will deselect the address and the

status light will briefly turn red. If the unit is plugged into a LocoNet port you

can unplug the throttle and the throttle will then be in 'sleep' mode until

plugged back in to LocoNet port.

Warranty & Repair

Digitrax gives a one year "No Worries" Warranty against manufacturing defects and

accidental customer damage on all Digitrax products.

That's it! A simple, straightforward warranty with no tricky language!

Visit www.digitrax.com for complete warranty details and instructions for returning

items for repair.

Digitrax, the Digitrax train logos, LocoNet, Evolution, Zephyr Xtra & others are trademarks of

Digitrax, Inc. This manual may not be reproduced in any form or translated into other

languages without Digitrax's express permission.

Digitrax, Inc. is not responsible for

unintentional errors or omissions

in this document.

2443 Transmitter Road

Panama City, FL 32404

www.digitrax.com

Need Support?

helpdesk.digitrax.com

Complete Train Control

Run Your Trains, Not Your Track!

Get the latest version of all manuals at

www.digitrax.com.

This manual was updated October 2017.

Components included in the UT4 are

covered by US patent 6,275,739

and others.