Argonaut A615 SMFD Panduan Pengguna - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Monitor Argonaut A615 SMFD. Argonaut A615 SMFD 20 halaman. Smart multi function display

Halaman Cetak

Troubleshooting

Problem & Question

Power LED is not on

Picture is Fuzzy

Picture bounces or wave

pattern is present in the

picture

The Power LED is

ON(Green) but there's no

video or no picture

The Power LED is

ON(Amber) but there's no

video or no picture

The Power LED is

ON(Amber flashing) but

there's no video or no

picture

Discolored Image (RED,

GREEN, or BLUE)

Screen image is not

centered or sized properly.

Picture has color defects

(white does not look white)

Horizontal or vertical

disturbances on the screen

Image is dim

Display Turns Off

Possible Solution

*Confirm power supply output.

*Check power connection.

*Press Reset in OSD.

*Move electrical devices that may cause

electrical interference.

*Adjust dimming control brightness up.

*Press power button.

*Verify input signal.

*Make sure cables are properly

connected.

* Inspect input cables for damage.

*Confirm the input source is operational

by connecting a separate display to the

source.

*Flip breaker switch to power off and on.

*Check correct signal source is selected.

* Inspect the display's video or DVI

cable and make sure that none of the pins

are bent or corroded.

* Press Reset Position in OSD.

* Press Reset Color in OSD.

* Press Reset in OSD.

* Adjust brightness control.

* Confirm minimum voltage to regulator.

Page