Cisco PIX 506 Panduan Memulai Cepat - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Perangkat Keras Jaringan Cisco PIX 506. Cisco PIX 506 18 halaman. Chapter 3
Juga untuk Cisco PIX 506: Panduan Pengguna (8 halaman)

Halaman Cetak

Alternative Ways to Access the PIX 506/506E

You can use a serial terminal emulator from a PC or workstation connected to the Console port for

local administrative access.

You can also use PDM or a console to configure Telnet access to the PIX 506/506E. By default, Telnet

access is not permitted. To Telnet to the PIX 506/506E from the outside perimeter of the firewall,

configure an outside IP address and IPSec for a secure Telnet session. For more information, refer to

the Cisco PIX Firewall and VPN Configuration Guide.

AC T

LI NK

ET HE RN

ET 1

PC terminal adapter

To connect a console for local administrative access:

Plug one end of the console cable adapter into a standard 9-pin PC serial port.

Step 1

Step 2

Plug one end of the blue console cable (72-1259-01) into the PC terminal adapter.

Plug the other end of the blue console cable into the Console port.

Step 3

Step 4

Configure the PC terminal emulation software or terminal for 9600 baud, 8 data bits, no

parity, and 1 stop bit.

Refer to the Cisco PIX Firewall and VPN Configuration Guide for information about how to use the

command-line interface (CLI).

AC T

PO W ER

LI NK

IN PU T

ET HE RN

PO W ER

ET 0

IN PU T

US B

CO NS O LE

Cisco PIX 506E

Blue console cable