Cisco PIX 506 Panduan Memulai Cepat - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Perangkat Keras Jaringan Cisco PIX 506. Cisco PIX 506 18 halaman. Chapter 3
Juga untuk Cisco PIX 506: Panduan Pengguna (8 halaman)

Halaman Cetak

Table 2

PIX 506/506E Rear Panel LEDs

LED

State

LINK

Off

Configuring the PIX 506/506E

The PIX 506/506E comes with a factory default configuration that meets the needs of most broadband

networking environments. The factory default configuration on the PIX 506/506E protects your inside

network from any unsolicited traffic. It is configured to use DHCP on the outside interface to acquire an

IP address. A default DHCP server address pool is included for hosts on the inside interface.

PDM contains a Startup Wizard that lets you easily change settings to suit your needs.

Instances in which it might be necessary to change or make additional changes to the default

configuration include the following:

• To create administrative and Telnet passwords

Note

We highly recommend that you change the administrative and Telnet passwords from

their default settings to secure the administration of the PIX Firewall.

• To configure Point-to-Point Protocol over Ethernet (PPPoE) or a static IP address for an outside

interface

• To configure VPN and Auto Update features

Description

Data is passing on the port.

No data is passing on the port.