Cisco PIX 506 Посібник із швидкого старту - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Мережеве обладнання Cisco PIX 506. Cisco PIX 506 18 сторінок. Chapter 3
Також для Cisco PIX 506: Посібник користувача (8 сторінок)
Друкувати сторінкуTable 2
PIX 506/506E Rear Panel LEDs
LED
State
LINK
On
Off
6
Configuring the PIX 506/506E
The PIX 506/506E comes with a factory default configuration that meets the needs of most broadband
networking environments. The factory default configuration on the PIX 506/506E protects your inside
network from any unsolicited traffic. It is configured to use DHCP on the outside interface to acquire an
IP address. A default DHCP server address pool is included for hosts on the inside interface.
PDM contains a Startup Wizard that lets you easily change settings to suit your needs.
Instances in which it might be necessary to change or make additional changes to the default
configuration include the following:
• To create administrative and Telnet passwords
Note
We highly recommend that you change the administrative and Telnet passwords from
their default settings to secure the administration of the PIX Firewall.
• To configure Point-to-Point Protocol over Ethernet (PPPoE) or a static IP address for an outside
interface
• To configure VPN and Auto Update features
Description
Data is passing on the port.
No data is passing on the port.
7