Cisco PIX-515E Panduan Memulai Cepat - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Perangkat Keras Jaringan Cisco PIX-515E. Cisco PIX-515E 42 halaman. Security appliance
Juga untuk Cisco PIX-515E: Panduan Memulai Cepat (42 halaman)

Halaman Cetak

8. When the Add Global Pool Item window appears:

a. Choose outside from the Interface drop-down menu.

b. Click the Port Address Translation (PAT) using the IP address of the interface radio button.

c. Assign the same Pool ID for this pool as you did in Step 6d above. (For this scenario, the Pool

ID is 200.)

d. Click the OK button. The configuration should be similar to the following:

9. Confirm that the configuration values are correct, then:

a. Click the OK

b. Click the Apply

Because there are only two public IP addresses available, with one reserved for the

Note

DMZ server, all traffic initiated by the inside HTTP client exits the security appliance

using the outside interface IP address. This configuration allows traffic from the

inside client to be routed to and from the Internet.

button.

button in the main window.