Cisco PIX-515E 빠른 시작 매뉴얼 - 페이지 12

{카테고리_이름} Cisco PIX-515E에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco PIX-515E 42 페이지. Security appliance
Cisco PIX-515E에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (42 페이지)

페이지 인쇄

8. When the Add Global Pool Item window appears:

a. Choose outside from the Interface drop-down menu.

b. Click the Port Address Translation (PAT) using the IP address of the interface radio button.

c. Assign the same Pool ID for this pool as you did in Step 6d above. (For this scenario, the Pool

ID is 200.)

d. Click the OK button. The configuration should be similar to the following:

9. Confirm that the configuration values are correct, then:

a. Click the OK

b. Click the Apply

Because there are only two public IP addresses available, with one reserved for the

Note

DMZ server, all traffic initiated by the inside HTTP client exits the security appliance

using the outside interface IP address. This configuration allows traffic from the

inside client to be routed to and from the Internet.

button.

button in the main window.