Epson 00000650 - Perfection 3200 PRO Color Scanner Manual Perangkat Lunak - Halaman 23

Jelajahi secara online atau unduh pdf Manual Perangkat Lunak untuk Pemindai Epson 00000650 - Perfection 3200 PRO Color Scanner. Epson 00000650 - Perfection 3200 PRO Color Scanner 34 halaman. Epson scan icm updater v1.20 (psb.2008.07.001)
Juga untuk Epson 00000650 - Perfection 3200 PRO Color Scanner: Brosur & Spesifikasi (4 halaman), Mulai Manual (8 halaman), Buletin Dukungan Produk (23 halaman), Manual (11 halaman), Baca Ini Terlebih Dahulu (2 halaman), Memperbarui (1 halaman)

Halaman Cetak
Epson 00000650 - Perfection 3200 PRO Color Scanner Manual Perangkat Lunak
MonacoEZcolor displays a progress bar as it
builds the scanner profile. Once the profile
is built, MonacoEZcolor displays the
Finished screen, as shown:
You've now successfully built a profile for
scanning transparencies. In the next section,
we provide instructions for building a
display profile to provide accurate color on
your monitor. If you want to start using your
profiles right away, you can skip to
"Scanning with LaserSoft SilverFast" on
page 23.

Building a Display Profile

A profile that accurately describes the behavior of
your monitor is essential to making color
management work. If you have a third-party
calibrator that uses a measuring device, or you've
purchased the MonacoOPTIX sensor for use with
MonacoEZcolor, we recommend that you use
these tools instead of the visual calibration
described in this section.
1
Launch MonacoEZcolor.
2
Click Create Monitor Profile.
MonacoEZcolor checks for the presence of
the MonacoOPTIX colorimeter, and presents
you with a screen containing ordering
information.
3
Click the right arrow to proceed with the
visual calibration.
4
Read the general instructions on display
warmup time, room lighting, and display
controls. Then select your monitor type, and
click the right arrow to proceed.
19