Epson 00000650 - Perfection 3200 PRO Color Scanner 소프트웨어 설명서 - 페이지 23
{카테고리_이름} Epson 00000650 - Perfection 3200 PRO Color Scanner에 대한 소프트웨어 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson 00000650 - Perfection 3200 PRO Color Scanner 34 페이지. Epson scan icm updater v1.20 (psb.2008.07.001)
Epson 00000650 - Perfection 3200 PRO Color Scanner에 대해서도 마찬가지입니다: 브로셔 및 사양 (4 페이지), 수동 시작 (8 페이지), 제품 지원 게시판 (23 페이지), 매뉴얼 (11 페이지), 먼저 읽어보기 (2 페이지), 업데이트 (1 페이지)
페이지 인쇄
MonacoEZcolor displays a progress bar as it
builds the scanner profile. Once the profile
is built, MonacoEZcolor displays the
Finished screen, as shown:
You've now successfully built a profile for
scanning transparencies. In the next section,
we provide instructions for building a
display profile to provide accurate color on
your monitor. If you want to start using your
profiles right away, you can skip to
"Scanning with LaserSoft SilverFast" on
page 23.
Building a Display Profile
A profile that accurately describes the behavior of
your monitor is essential to making color
management work. If you have a third-party
calibrator that uses a measuring device, or you've
purchased the MonacoOPTIX sensor for use with
MonacoEZcolor, we recommend that you use
these tools instead of the visual calibration
described in this section.
1
Launch MonacoEZcolor.
2
Click Create Monitor Profile.
MonacoEZcolor checks for the presence of
the MonacoOPTIX colorimeter, and presents
you with a screen containing ordering
information.
3
Click the right arrow to proceed with the
visual calibration.
4
Read the general instructions on display
warmup time, room lighting, and display
controls. Then select your monitor type, and
click the right arrow to proceed.
19