Cisco 6400 Panduan Instalasi - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Server Cisco 6400. Cisco 6400 34 halaman. Video surveillance 6400 ip camera
Juga untuk Cisco 6400: Lembar data (8 halaman)

Halaman Cetak

Chapter 2

Camera Installation

This product must be connected to a power-over-ethernet (PoE) IEEE 802.3af compliant power source

Warning

or an IEC60950 compliant limited power source. Statement 353

Caution

Inline power circuits provide current through the communication cable. Use the Cisco provided cable or

a minimum 24AWG communication cable.

Note

The power adapter that you use with the IP camera must provide power that is within +/–10% of the

required power.

The equipment is to be connected to a Listed class 2, limited power source.

Note

Installing the IP Camera

To install the Cisco Video Surveillance 6400 IP Camera, perform the following steps.

Note

Use

Procedure

Attach the alignment sticker to the wall. Drill three mounting holes and one larger cabling hole into the

Step 1

wall, hammer the three included wall anchors into the holes, and secure the mounting plate with included

screws.

Attach the camera anchor bracket to the side of the IP camera with the two included screws.

Step 2

(Optional) If you want to use an external power source for the 6400 IP camera, or use external devices

Step 3

such as sensors and alarms, complete the steps in the

section on page 2-5

Step 4

Feed the cable with an RJ 45 jack through the front opening of the wall mount bracket.

Step 5

Push the spring mortise and hook the camera anchor bracket onto the groove of the wall mount bracket.

Secure the two screws on the other side of the wall mount bracket.

Step 6

Hang the wall mount bracket on the mounting plate.

Step 7

Secure the wall mount bracket to the mounting plate with the included screw.

Step 8

Connect the RJ45 jack to your network using an Ethernet cable, or to ensure a waterproof network

Step 9

connection, complete the steps in the

Adjust the angle of the wall mount bracket to achieve desired IP camera field of view.

Step 10

(Optional) Install the sun shield. For more information, see the

Step 11

page

OL-28494-01

Figure 2-1

as a visual reference for the following procedure.

before continuing to Step 4.

2-9.

"Connecting External Power and I/O Cables"

"Connecting a Waterproof Ethernet Cable" section on page

"Installing the Sun Shield" section on

Cisco Video Surveillance 6400 IP Camera Installation Guide

Installing the IP Camera

2-8.

2-3