Cisco APIC L4 Panduan Instalasi dan Servis - Halaman 18
Jelajahi secara online atau unduh pdf Panduan Instalasi dan Servis untuk Server Cisco APIC L4. Cisco APIC L4 46 halaman.
Halaman Cetak
Summary of Server Features
Feature
Network and management I/O
Modular LAN on Motherboard (mLOM)/ OCP3 3.0 slot
WoL
Power
ACPI
Front Panel
Cisco APIC M4/L4 Server Installation and Service Guide
14
Description
Rear panel:
• One 1-Gb Ethernet dedicated management port (RJ-45
connector)
• One RS-232 serial port (RJ-45 connector)
• One VGA video connector port (DB-15 connector)
• Two USB 3.0 ports
• One flexible modular LAN on motherboard (mLOM)/OCP
3.0 slot that can accommodate various interface cards
• One KVM console connector (supplies two USB 2.0
connectors, one VGA DB15 video connector, and one serial
port (RS232) RJ45 connector)
Front panel:
• One KVM console connector (supplies two USB 2.0
connectors, one VGA DB15 video connector, and one serial
port (RS232) RJ45 connector)
The dedicated mLOM/OCP 3.0 slot on the motherboard can
flexibly accommodate the following cards:
• Cisco Virtual Interface Cards
• OCP 3.0 network interface card (UCSC-O-ID10GC)
The two 1-Gb/10-Gb BASE-T Ethernet LAN ports support the
wake-on-LAN (WoL) standard.
Up to two of the following hot-swappable power supplies:
• 770 W (AC)
• 1050 W (AC)
• 1050 W (DC)
• 1600 W (AC)
• 2300 W (AC)
One power supply is mandatory; one more can be added for 1 +
1 redundancy.
The advanced configuration and power interface (ACPI) 4.0
standard is supported.
The front panel controller provides status indications and control
buttons
Overview