Cisco APIC L4 Посібник з монтажу та обслуговування - Сторінка 18

Переглянути онлайн або завантажити pdf Посібник з монтажу та обслуговування для Сервер Cisco APIC L4. Cisco APIC L4 46 сторінок.

Summary of Server Features

Feature

Network and management I/O

Modular LAN on Motherboard (mLOM)/ OCP3 3.0 slot

WoL

Power

ACPI

Front Panel

Cisco APIC M4/L4 Server Installation and Service Guide

Description

Rear panel:

• One 1-Gb Ethernet dedicated management port (RJ-45

connector)

• One RS-232 serial port (RJ-45 connector)

• One VGA video connector port (DB-15 connector)

• Two USB 3.0 ports

• One flexible modular LAN on motherboard (mLOM)/OCP

3.0 slot that can accommodate various interface cards

• One KVM console connector (supplies two USB 2.0

connectors, one VGA DB15 video connector, and one serial

port (RS232) RJ45 connector)

Front panel:

• One KVM console connector (supplies two USB 2.0

connectors, one VGA DB15 video connector, and one serial

port (RS232) RJ45 connector)

The dedicated mLOM/OCP 3.0 slot on the motherboard can

flexibly accommodate the following cards:

• Cisco Virtual Interface Cards

• OCP 3.0 network interface card (UCSC-O-ID10GC)

The two 1-Gb/10-Gb BASE-T Ethernet LAN ports support the

wake-on-LAN (WoL) standard.

Up to two of the following hot-swappable power supplies:

• 770 W (AC)

• 1050 W (AC)

• 1050 W (DC)

• 1600 W (AC)

• 2300 W (AC)

One power supply is mandatory; one more can be added for 1 +

1 redundancy.

The advanced configuration and power interface (ACPI) 4.0

standard is supported.

The front panel controller provides status indications and control

buttons

Overview