Cisco Firepower 1120 Panduan Instalasi - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Server Cisco Firepower 1120. Cisco Firepower 1120 6 halaman. Connected grid router
Juga untuk Cisco Firepower 1120: Panduan Pemasangan Perangkat Keras (30 halaman), Panduan Memulai Cepat (10 halaman), Manual (6 halaman), Panduan Pemasangan Perangkat Keras (42 halaman), Panduan Penyebaran (8 halaman), Memulai (42 halaman), Panduan Pemasangan Perangkat Keras (42 halaman)

Installation Safety and Site Preparation

Required Tools and Equipment for Installation and Maintenance



Number 2 Phillips screwdriver



Phillips screwdrivers: small, 3/16-in. (4 to 5 mm) and medium, 1/4-in. (6 to 7 mm)



Screws that fit your rack

In addition, depending on the type of modules you plan to use, you might need the following equipment to connect a

port to an external network:



Cables for connection to the WAN and LAN ports (dependent on configuration).



Ethernet hub or PC with a network interface card for connection to an Ethernet (LAN) port.



Console terminal (an ASCII terminal or a PC running HyperTerminal or similar terminal emulation software) configured

for 9600 baud, 8 data bits, 1 stop bit, no flow control, and no parity.



Modem for connection to the auxiliary port for remote administrative access (optional).