Cisco Firepower 1120 Panduan Memulai Cepat

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Server Cisco Firepower 1120. Cisco Firepower 1120 10 halaman. Connected grid router
Juga untuk Cisco Firepower 1120: Panduan Pemasangan Perangkat Keras (30 halaman), Panduan Instalasi (6 halaman), Manual (6 halaman), Panduan Pemasangan Perangkat Keras (42 halaman), Panduan Penyebaran (8 halaman), Memulai (42 halaman), Panduan Pemasangan Perangkat Keras (42 halaman)

Halaman Cetak
Cisco Firepower 1120 Panduan Memulai Cepat
Connecting the Router to Power
This section describes how to connect the Cisco 1120 Connected Grid Router to AC and DC power source
These topics are discussed:

Before You Begin

Before you connect power to the router, read these topics:

Verify Router Hardware Readiness

Before connecting the router to power, verify the following:
The unit is grounded as described in
The SD flash memory module is installed correctly as described in

Tools and Materials You Supply

You must provide the following tools and materials to connect the router to AC power or optional DC power:
Note:
For the AC power connector, a 5-way screw terminal printed circuit board plug connector manufactured by
Phoenix Contact (part number 1913604) is supplied.
Note:
For the DC power connector, a 2-way screw terminal printed circuit board plug connector manufactured by
Phoenix Contact (part number 1912184) is supplied.
Wire-stripping tool
Flat-blade screwdriver
Mounting the Router, page
Cisco Systems, Inc.
www.cisco.com
43
33.
Using the SD Flash Memory Module, page
77.