Cisco Firepower 1120 Panduan Memulai Cepat - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Server Cisco Firepower 1120. Cisco Firepower 1120 10 halaman. Connected grid router
Juga untuk Cisco Firepower 1120: Panduan Pemasangan Perangkat Keras (30 halaman), Panduan Instalasi (6 halaman), Manual (6 halaman), Panduan Pemasangan Perangkat Keras (42 halaman), Panduan Penyebaran (8 halaman), Memulai (42 halaman), Panduan Pemasangan Perangkat Keras (42 halaman)

Figure 1

Router Power Source Input Terminals

Figure 1 on page 46

Table 1

Power Input Terminals

Ite

Terminal Type

AC-Input Power Source Terminals

DC-Input Power Source Terminals

–

Electrical Wire Color Codes

This section provides general information about the standard wire coloring used for AC and DC power connections. Use

these colors as a guide when wiring the terminal block as part of the AC power and DC power connection procedure.

Caution:

Verify power wire color information for your installation site with a qualified electrician before making any

power connections to the router.

shows the label for each terminal.

Description

Ground terminal

To provide a protected earth ground, terminate either a green/yellow or green wire

(region-specific) from the AC power cable on the external screw on the left side of the router.

Table 2 on page 47

Neutral wire terminal

Line terminal

Negative

Positive

for details on wiring colors by region