Cisco Firepower 1120 Snelstarthandleiding - Pagina 4

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Cisco Firepower 1120. Cisco Firepower 1120 10 pagina's. Connected grid router
Ook voor Cisco Firepower 1120: Hardware installatiehandleiding (30 pagina's), Installatiehandleiding (6 pagina's), Handmatig (6 pagina's), Hardware installatiehandleiding (42 pagina's), Uitrolhandleiding (8 pagina's), Aan de slag (42 pagina's), Hardware installatiehandleiding (42 pagina's)

Cisco Firepower 1120 Snelstarthandleiding
Figure 1
Router Power Source Input Terminals
Figure 1 on page 46
Table 1
Power Input Terminals
Ite
Terminal Type
m
1
AC-Input Power Source Terminals
N
L3
L2
L1
2
DC-Input Power Source Terminals
+
Electrical Wire Color Codes
This section provides general information about the standard wire coloring used for AC and DC power connections. Use
these colors as a guide when wiring the terminal block as part of the AC power and DC power connection procedure.
Caution:
Verify power wire color information for your installation site with a qualified electrician before making any
power connections to the router.
1
shows the label for each terminal.
Description
Ground terminal
To provide a protected earth ground, terminate either a green/yellow or green wire
(region-specific) from the AC power cable on the external screw on the left side of the router.
Table 2 on page 47
Neutral wire terminal
Line terminal
Line terminal
Line terminal
Negative
Positive
for details on wiring colors by region
46
2