Cisco SCE8000 GBE Prosedur Penghapusan dan Penggantian - Halaman 17
Jelajahi secara online atau unduh pdf Prosedur Penghapusan dan Penggantian untuk Server Cisco SCE8000 GBE. Cisco SCE8000 GBE 36 halaman. 10gbe platform
Juga untuk Cisco SCE8000 GBE: Panduan Memulai Cepat (25 halaman), Panduan Konfigurasi (18 halaman), Menginstal (21 halaman)
Halaman Cetak
Chapter 9 Removal and Replacement Procedures
If the captive installation screws are loose, the EMI gaskets on the installed modules will push adjacent
Note
modules toward the open slot, reducing the opening size and making it difficult to install the replacement
module.
Remove the module filler plate by removing the two Phillips pan-head screws from the filler plate. To
Step 5
remove a module, follow the procedure in the
Fully open both ejector levers on the new module. (See
Step 6
Figure 9-10
SCE8000-SCM-E
OPTICAL
BYPASS1
OL-26784-02
Ejector Levers and Captive Installation Screws
OPTICAL BYPASS
CONSOLE
PORT1
10/100/
LINK/
1000
ACTIVE
"Removing a Module" section on page
Figure
STATUS
OPTICAL
AUX
PORT2
BYPASS2
10/100/
LINK/
1000
ACTIVE
Ejector lever
Cisco SCE8000 10GBE Installation and Configuration Guide
Installing a Module
9-20.
9-10.)
SCE8000 EXTENDED SERVICE CONTROL MODULE
MASTER
SYSTEM POWER
M AS TE R
SY ST EM PO W
ER
Captive
installation
screws
9-17