Cisco UCS B420 M4 Catatan Instalasi dan Layanan - Halaman 34

Jelajahi secara online atau unduh pdf Catatan Instalasi dan Layanan untuk Server Cisco UCS B420 M4. Cisco UCS B420 M4 38 halaman. Blade server

Enabling the Trusted Platform Module

c) Install the TPM to the TPM socket on the server motherboard and secure it using the one-way screw that

is provided. See the figure below for the location of the TPM socket.

d) Return the blade server to the chassis and allow it to be automatically reacknowledged, reassociated, and

recommissioned.

e) Continue with enabling TPM support in the server BIOS in the next step.

Figure 19: TPM Socket Location

Step 2

Enable TPM Support in the BIOS.

Note

If TPM support was disabled for any reason, use the following procedure to enable it.

a) In the Cisco UCS Manager Navigation pane, click the Servers tab.

Cisco UCS B420 M4 Blade Server Installation and Service Note

Front of server

TPM 2.0 support is enabled by default in Cisco UCS Manager Release 3.1(2) and Release 2.2(8)

and later BIOS policy. If your Cisco UCS Manager Release 3.1(2) or Release 2.2(8) and later BIOS

policy is using the default setting and TPM 2.0 support is already enabled, skip this procedure and

go to the next step.

TPM 1.2 support is disabled by default in Cisco UCS Manager Release 2.2(5) and later BIOS policy.

If your Cisco UCS Manager Release 2.2(5) and later BIOS policy is using the default setting and

TPM 1.2 support is already enabled, skip this procedure and go to the next step.

TPM socket on

motherboard

Servicing the Blade Server