Epson Perfection 1270 Panduan Servis - Halaman 23
Jelajahi secara online atau unduh pdf Panduan Servis untuk Pemindai Epson Perfection 1270. Epson Perfection 1270 46 halaman. Color image scanner
Juga untuk Epson Perfection 1270: Penggantian Kartrid (2 halaman), Mulai di sini (2 halaman), Panduan Petunjuk Instalasi (8 halaman)
Halaman Cetak
EPSON Perfection 1670 Photo/Perfection 1270
2.2.5 Removal of CR Motor
1.
Remove the Upper Housing. (Refer to 2.2.2)
2.
Remove the three screws (CBP M3x8) that are securing the CR Motor.
3.
Disconnect the CR Motor Connector Cable from the I/F Board. (Refer to Figure 2-9.)
4.
After releasing the CR Motor Connector Cable from the groove of the Lower Housing,
pull it out of the holes. (Refer to Figure 2-19.)
When reinstalling the CR Motor, securely set the Connector Cable
C A U T I O N
into the holes and groove of the Lower Housing. If the Connector
Cable is set in an isolated state, it may be entangled when the Carriage
operates.
Hole
CR Motor Connector Cable
Figure 2-19. Routing of CR Motor Connector Cable
5.
Lift the CR Motor, remove the Timing Belt from the Transmission Gear, and remove
the CR Motor.
DISASSEMBLY/ASSEMBLY
CR Motor
Hole
Disassembly Procedure
CBP (M3x8)
Tightening torque 6-8kgfcm
Figure 2-20. Removal of CR Motor Unit
CR Motor
Transmission Gear
Timing Belt
Figure 2-21. Removal of Timing Belt
Revision B
23