Cisco ATA 186 Konfigurasi - Halaman 12

Jelajahi secara online atau unduh pdf Konfigurasi untuk Gerbang Cisco ATA 186. Cisco ATA 186 28 halaman. Analog telephone adaptor
Juga untuk Cisco ATA 186: Lembar data (7 halaman), Ikhtisar (11 halaman), Panduan Ikhtisar (11 halaman), Panduan Konfigurasi (8 halaman), Panduan Pengguna (12 halaman), Panduan Instalasi dan Konfigurasi (13 halaman), Petunjuk Untuk Menginstal (6 halaman), Konfigurasi (6 halaman)

Cisco ATA 186 Konfigurasi
You also need the following items:
Category-3 10BASE-T or 100BASE-T or better Ethernet
cable. One cable is needed for each Ethernet connection.
A Category-3 Ethernet cable supports 10BASE-T for up to
100 meters without quality degradation, and a Category-3
Ethernet cable supports 100BASE-T for up to 10 meters
without quality degradation.
For uplink connections, use a crossover Ethernet cable to
connect the Cisco ATA to another Ethernet device (such as a
router or PC) without using a hub. Otherwise, use
straight-through Ethernet cables for both uplink and data
port connections.
Access to an IP network
One or two analog Touch-Tone telephones or fax machines,
or one of each
12