Cisco ATA 186 Konfigurasi - Halaman 10

Jelajahi secara online atau unduh pdf Konfigurasi untuk Gerbang Cisco ATA 186. Cisco ATA 186 28 halaman. Analog telephone adaptor
Juga untuk Cisco ATA 186: Lembar data (7 halaman), Ikhtisar (11 halaman), Panduan Ikhtisar (11 halaman), Panduan Konfigurasi (8 halaman), Panduan Pengguna (12 halaman), Panduan Instalasi dan Konfigurasi (13 halaman), Petunjuk Untuk Menginstal (6 halaman), Konfigurasi (6 halaman)

Halaman Cetak
Cisco ATA 186 Konfigurasi
Warning
To avoid electric shock, do not connect safety
extra-low voltage (SELV) circuits to
telephone-network voltage (TNV) circuits. LAN
ports contain SELV circuits, and WAN ports
contain TNV circuits. Some LAN and WAN ports
both use RJ-45 connectors. Use caution when
connecting cables.
Warning
Do not work on the system or connect or
disconnect cables during periods of lightning
activity.
Warning
This equipment is to be installed and maintained
by service personnel only as defined by AS/NZS
3260 Clause 1.2.14.3 Service Personnel.
Read the instructions in the "Installation Steps"
Caution
section on page 13 before you connect the system
to its power source.
10