Cisco ATA 186 Configurazione - Pagina 10

Sfoglia online o scarica il pdf Configurazione per Porta d'ingresso Cisco ATA 186. Cisco ATA 186 28. Analog telephone adaptor
Anche per Cisco ATA 186: Scheda tecnica (7 pagine), Panoramica (11 pagine), Panoramica del manuale (11 pagine), Manuale di configurazione (8 pagine), Manuale d'uso (12 pagine), Manuale di installazione e configurazione (13 pagine), Istruzioni per l'installazione (6 pagine), Configurazione (6 pagine)

Cisco ATA 186 Configurazione
Warning
To avoid electric shock, do not connect safety
extra-low voltage (SELV) circuits to
telephone-network voltage (TNV) circuits. LAN
ports contain SELV circuits, and WAN ports
contain TNV circuits. Some LAN and WAN ports
both use RJ-45 connectors. Use caution when
connecting cables.
Warning
Do not work on the system or connect or
disconnect cables during periods of lightning
activity.
Warning
This equipment is to be installed and maintained
by service personnel only as defined by AS/NZS
3260 Clause 1.2.14.3 Service Personnel.
Read the instructions in the "Installation Steps"
Caution
section on page 13 before you connect the system
to its power source.
10