Cisco ATA 186 Konfigurasi - Halaman 25

Jelajahi secara online atau unduh pdf Konfigurasi untuk Gerbang Cisco ATA 186. Cisco ATA 186 28 halaman. Analog telephone adaptor
Juga untuk Cisco ATA 186: Lembar data (7 halaman), Ikhtisar (11 halaman), Panduan Ikhtisar (11 halaman), Panduan Konfigurasi (8 halaman), Panduan Pengguna (12 halaman), Panduan Instalasi dan Konfigurasi (13 halaman), Petunjuk Untuk Menginstal (6 halaman), Konfigurasi (6 halaman)

Making a Call

Lift the telephone handset. Make a call as you normally do. You

will hear ringing if the called party is available. When the called

party answers, speak normally and hang up when finished. You

can cancel or discontinue your call at any time by hanging up

the handset. You can make a separate, simultaneous telephone

call by using the second handset connected to the ATA.

Your service provider or system administrator might

Note

offer a different dial plan. If you cannot place calls

using the preceding instructions, contact your service

provider or system administrator for assistance.

The suggestions in this section are general troubleshooting tips.

• Make sure that the DHCP server is operating correctly.

Note that the function button blinks slowly when the

Cisco ATA attempts to acquire the DHCP configuration.

• If the green activity LED is not flashing after you connect

the Ethernet cable, make sure that both the power cord and

the Ethernet connection are secure.