Cisco Firepower 1600 Panduan Pemasangan Perangkat Keras - Halaman 29

Jelajahi secara online atau unduh pdf Panduan Pemasangan Perangkat Keras untuk Gerbang Cisco Firepower 1600. Cisco Firepower 1600 44 halaman.

Installation Preparation

Warning

Statement 1040—Product Disposal

Ultimate disposal of this product should be handled according to all national laws and regulations.

Warning

Statement 1074—Comply with Local and National Electrical Codes

To reduce risk of electric shock or fire, installation of the equipment must comply with local and national

electrical codes.

Warning

Statement 19—TN Power Warning

The device is designed to work with TN power systems.

Safety Recommendations

Observe these safety guidelines:

• Keep the area clear and dust free before, during, and after installation.

• Keep tools away from walkways, where you and others might trip over them.

• Do not wear loose clothing or jewelry, such as earrings, bracelets, or chains that could get caught in the

• Wear safety glasses if you are working under any conditions that might be hazardous to your eyes.

• Do not perform any action that creates a potential hazard to people or makes the equipment unsafe.

• Never attempt to lift an object that is too heavy for one person.

Warning

Before working on a chassis, be sure the power cord is unplugged.

Be sure to read the REGULATORY & COMPLIANCE SAFETY INFORMATION document before installing

the chassis.

Follow these guidelines when working on equipment powered by electricity:

• Before beginning procedures that require access to the interior of the chassis, locate the emergency

• Do not work alone if potentially hazardous conditions exist anywhere in your work space.

chassis.

power-off switch for the room in which you are working. Then, if an electrical accident occurs, you can

act quickly to turn off the power.

Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide