Cisco Linksys WAG310G Panduan Pengguna - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Gerbang Cisco Linksys WAG310G. Cisco Linksys WAG310G 39 halaman. Wireless-g adsl2+ iad gateway
Halaman Cetak
Chapter3
Chapter 3:
Advanced Confguraton
After setting up the Gateway with the Setup Wizard
(located on the CD-ROM), the Gateway will be ready
for use. However, if you'd like to change its advanced
settings, use the Gateway's web-based utility. This chapter
describes each web page of the utility and each page's key
functions. You can access the utility via a web browser on
a computer connected to the Gateway.
The web-based utility has these main tabs: Setup,
Wireless, Security, Access Restrictions, Applications &
Gaming, Administration, and Status. Additional tabs will
be available after you click one of the main tabs.
NOTE:
When first installing the Gateway, you
should use the Setup Wizard on the Setup CD-
ROM. If you want to configure advanced settings,
use this chapter.
How to Access the Web-Based Utility
To access the web-based utility, launch the web browser
on your computer, and enter the Gateway's default IP
address, 192.18.1.1, in the Address field. Then, press
Enter.
A login screen appears. The first time you open the web-
based utility, use the default user name and password,
admn. (You can set a new user name and password from
the Administration tab's Management screen.) Click OK to
continue.
Login Screen
Setup > Basic Setup
The first screen that appears is the Basic Setup screen. This
allows you to change the Gateway's general settings.
Wreless-G ADSL2+ IAD Gateway
Advanced Configuration
Setup > Basic Setup
Internet Setup
The Internet Setup section configures the Gateway to
your Internet connection. Most of this information can be
obtained through your ISP.
Internet Connection Type
The Gateway supports six encapsulation methods. Select
the appropriate type of encapsulation from the drop-
down menu. Each Basic Setup screen and available features
will differ depending on what type of encapsulation you
select. These are the available types:
•
RFC 2364 PPPoA
•
RFC 2516 PPPoE
•
RFC 1483 Routed
•
IPoA
•
RFC 1483 Bridged
•
Bridge Mode Only
VC Settings
Configure your Virtual Circuit (VC) settings in this section.
Multplexng
Select LLC or VC, depending on your ISP.