Cisco Linksys WAG310G 사용자 설명서 - 페이지 8

{카테고리_이름} Cisco Linksys WAG310G에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Linksys WAG310G 39 페이지. Wireless-g adsl2+ iad gateway

페이지 인쇄

Chapter3

Chapter 3:

Advanced Confguraton

After setting up the Gateway with the Setup Wizard

(located on the CD-ROM), the Gateway will be ready

for use. However, if you'd like to change its advanced

settings, use the Gateway's web-based utility. This chapter

describes each web page of the utility and each page's key

functions. You can access the utility via a web browser on

a computer connected to the Gateway.

The web-based utility has these main tabs: Setup,

Wireless, Security, Access Restrictions, Applications &

Gaming, Administration, and Status. Additional tabs will

be available after you click one of the main tabs.

NOTE:

When first installing the Gateway, you

should use the Setup Wizard on the Setup CD-

ROM. If you want to configure advanced settings,

use this chapter.

How to Access the Web-Based Utility

To access the web-based utility, launch the web browser

on your computer, and enter the Gateway's default IP

address, 192.18.1.1, in the Address field. Then, press

Enter.

A login screen appears. The first time you open the web-

based utility, use the default user name and password,

admn. (You can set a new user name and password from

the Administration tab's Management screen.) Click OK to

continue.

Setup > Basic Setup

The first screen that appears is the Basic Setup screen. This

allows you to change the Gateway's general settings.

Wreless-G ADSL2+ IAD Gateway

Advanced Configuration

Setup > Basic Setup

Internet Setup

The Internet Setup section configures the Gateway to

your Internet connection. Most of this information can be

obtained through your ISP.

Internet Connection Type

The Gateway supports six encapsulation methods. Select

the appropriate type of encapsulation from the drop-

down menu. Each Basic Setup screen and available features

will differ depending on what type of encapsulation you

select. These are the available types:

•

RFC 2364 PPPoA

•

RFC 2516 PPPoE

•

RFC 1483 Routed

•

IPoA

•

RFC 1483 Bridged

•

Bridge Mode Only

VC Settings

Configure your Virtual Circuit (VC) settings in this section.

Multplexng

Select LLC or VC, depending on your ISP.