Epson Stylus Photo RX600 Mulai dari Sini Manual - Halaman 4

Jelajahi secara online atau unduh pdf Mulai dari Sini Manual untuk Pemindai Epson Stylus Photo RX600. Epson Stylus Photo RX600 10 halaman. Product support bulletin(s)
Juga untuk Epson Stylus Photo RX600: Tips (2 halaman), Lembar Informasi Produk (4 halaman), Informasi Produk (19 halaman), Brosur (2 halaman), Setup Manual (2 halaman), Panduan Memulai Cepat (28 halaman), Panduan Pengguna (12 halaman), Memperbarui (1 halaman), Buletin Dukungan Produk (6 halaman), Buletin Dukungan Produk (1 halaman), Spesifikasi (2 halaman), Cara Menyalin dan Mencetak (20 halaman), Panduan Instruksional (4 halaman)

Unlock the Printer

Lift up the entire scanner unit

using the handles on the side.

Remove the clear plastic

sheet inside.

Remove the orange plastic print head lock and store it in the

storage area.

Caution: You must remove the orange print head lock or the

RX600 won't work.

Close the scanner unit.

Connect the short cable leading from

the scanner lid to the round TPU

connector on the back of the RX600.

Position the connector as shown here

before pushing it in. Don't force it in.

Plug In and Turn On

Plug the RX600 into a grounded

electrical outlet. Do not connect

the USB cable yet.

Press and hold the On button until

the Mode and Setup lights flash.

Press the Color button on the front

of the RX600. The print head moves

into loading position.

Lift up the entire scanner unit.

continue