Epson Continuous Ink Supply System Panduan Petunjuk Instalasi - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Aksesori Printer Epson Continuous Ink Supply System. Epson Continuous Ink Supply System 8 halaman. For epson stylus photo r200/r210/r300/r310

Halaman Cetak

CIS for EPSON stylus R200/R210/R300/R310 Instruction

Thank you for purchasing ST Continuous Ink Supply System. We appreciate

your support and will try our best to make your experience with our products a

pleasant one. Printing has been a different experience ever since you installed

ST Continuous Ink Supply system on your own printer. Just imagining being

able to print without regard to the ink level in those expensive little cartridges.

Please take your time installing ST Continuous Ink Supply system. Do not

remove your old cartridge until you have the ST CIS system primed and ready to

install (to prevent the drying of heads). In addition, make sure you are getting

perfect nozzle checks before installing the ST CIS system. The ST CIS system

won't be able to work properly if the nozzles are previously clogged.

Most people get a perfect nozzle check the first time after installing the ST

Continuous Ink Supply system; others may need to run two or three cleaning

cycles or let the printer sit for a while before they get the perfect results.

1、General Guide:

1) Components

A、CIS system 1 set

D、Refill Kit

2) Opening box inspection

a、Check whether all the accessories are ready.

b、Check whether there's the leakage of the CISS, whether some tubes have been

separated from the CISS, whether there are air bubbles in the tube (If there exists more

than 20CM air space, please kindly to contact with the local dealer)

2、Printer testing:

1) Check whether the printer is in normal condition, like mechanical status, lubrication

status etc.

B、 Air filters

6pcs

E、Instruction CD 1pc

6pcs

C、Support Arm

1 set