Epson Continuous Ink Supply System 설치 지침 매뉴얼 - 페이지 2

{카테고리_이름} Epson Continuous Ink Supply System에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Continuous Ink Supply System 8 페이지. For epson stylus photo r200/r210/r300/r310

페이지 인쇄

CIS for EPSON stylus R200/R210/R300/R310 Instruction

Thank you for purchasing ST Continuous Ink Supply System. We appreciate

your support and will try our best to make your experience with our products a

pleasant one. Printing has been a different experience ever since you installed

ST Continuous Ink Supply system on your own printer. Just imagining being

able to print without regard to the ink level in those expensive little cartridges.

Please take your time installing ST Continuous Ink Supply system. Do not

remove your old cartridge until you have the ST CIS system primed and ready to

install (to prevent the drying of heads). In addition, make sure you are getting

perfect nozzle checks before installing the ST CIS system. The ST CIS system

won't be able to work properly if the nozzles are previously clogged.

Most people get a perfect nozzle check the first time after installing the ST

Continuous Ink Supply system; others may need to run two or three cleaning

cycles or let the printer sit for a while before they get the perfect results.

1、General Guide:

1) Components

A、CIS system 1 set

D、Refill Kit

2) Opening box inspection

a、Check whether all the accessories are ready.

b、Check whether there's the leakage of the CISS, whether some tubes have been

separated from the CISS, whether there are air bubbles in the tube (If there exists more

than 20CM air space, please kindly to contact with the local dealer)

2、Printer testing:

1) Check whether the printer is in normal condition, like mechanical status, lubrication

status etc.

B、 Air filters

6pcs

E、Instruction CD 1pc

6pcs

C、Support Arm

1 set