Epson LQ-570e Buletin Dukungan Produk - Halaman 6

Jelajahi secara online atau unduh pdf Buletin Dukungan Produk untuk Aksesori Printer Epson LQ-570e. Epson LQ-570e 16 halaman. Epson serial impact dot matrix printers
Juga untuk Epson LQ-570e: Panduan Informasi Produk (8 halaman), Manual (12 halaman), Panduan Referensi Cepat (15 halaman), Panduan Informasi Produk (18 halaman), Spesifikasi (2 halaman), Panduan Perakitan (8 halaman), Panduan Referensi (34 halaman)

Epson LQ-570e Buletin Dukungan Produk
unless defined otherwise by the "ESC ( U command. Currently, the values for ml
and IT@ MUST be ml =2 and m2=0.
To determine the values for nl and n2 perform the following steps.
1.
Determine the desired vertical motion dii in inches.
2
Multiply the distance by 360.
3.
Divide the result by 256 using long division.
4.
The remainder in the quotient from step 3 is the value for n1.
5.
The whole number in the quotient from step 3 is the value for n2
EXAMPLE
1.
The desired distance is 1 inch.
2
3.
4.
5.
In the Basic programming language, the command would look like thii.
'Reverse" paper feed less than l/2 inch can be performed with this command. To
1.
Determine the desired vertical motion dice in inches.
2
Multiply the distance by 360.
3.
Divide the result by 256 using long division.
4.
Subtract the remainder in the quotient computed in step 3 from 256.
5.
The result from step 4 is the value for n1.
6.
PSB No: P-0082
Page: 6 of 14