Epson LQ-570e Ürün Destek Bülteni - Sayfa 6

Yazıcı Aksesuarları Epson LQ-570e için çevrimiçi göz atın veya pdf Ürün Destek Bülteni indirin. Epson LQ-570e 16 sayfaları. Epson serial impact dot matrix printers
Ayrıca Epson LQ-570e için: Ürün Bilgi Kılavuzu (8 sayfalar), Manuel (12 sayfalar), Hızlı Referans Kılavuzu (15 sayfalar), Ürün Bilgi Kılavuzu (18 sayfalar), Teknik Özellikler (2 sayfalar), Montaj Kılavuzu (8 sayfalar), Referans Kılavuzu (34 sayfalar)

Sayfayı Yazdır
Epson LQ-570e Ürün Destek Bülteni
unless defined otherwise by the "ESC ( U command. Currently, the values for ml
and IT@ MUST be ml =2 and m2=0.
To determine the values for nl and n2 perform the following steps.
1.
Determine the desired vertical motion dii in inches.
2
Multiply the distance by 360.
3.
Divide the result by 256 using long division.
4.
The remainder in the quotient from step 3 is the value for n1.
5.
The whole number in the quotient from step 3 is the value for n2
EXAMPLE
1.
The desired distance is 1 inch.
2
3.
4.
5.
In the Basic programming language, the command would look like thii.
'Reverse" paper feed less than l/2 inch can be performed with this command. To
1.
Determine the desired vertical motion dice in inches.
2
Multiply the distance by 360.
3.
Divide the result by 256 using long division.
4.
Subtract the remainder in the quotient computed in step 3 from 256.
5.
The result from step 4 is the value for n1.
6.
PSB No: P-0082
Page: 6 of 14