Acuity Brands Lighting Lithonia Lighting TWP LED 20C 700 40K T3M MVOLT DDBXD Petunjuk Instalasi - Halaman 4

Jelajahi secara online atau unduh pdf Petunjuk Instalasi untuk Peralatan Pencahayaan Acuity Brands Lighting Lithonia Lighting TWP LED 20C 700 40K T3M MVOLT DDBXD. Acuity Brands Lighting Lithonia Lighting TWP LED 20C 700 40K T3M MVOLT DDBXD 4 halaman.

Halaman Cetak

Installation Instructions

TWP-LED

Wire Guard

WALL MOUNT:

1. Drill wall in two places for two

(2) 10-24 fasteners (not provided)

per drilling detail (Figure D).

2. Place wire guard over fixture.

3. Secure in place with fasteners

from step 1.

FIXTURE MOUNT:

1. Drill fixture per drilling de-

tail (Figure E). NOTE: Remove

photoelectric cell (when provided)

before drilling for fixture mounted

wire guard.

2. Place wire guard over fixture.

3. Secure in place with two (2) 10-

24 fasteners, washers, and spacers

(provided) as shown (Figure F).

Troubleshooting: If this fixture fails to operate properly, check to make sure: • The fixture is wired correctly.

grounded correctly.

• The line voltage at the fixture is correct. If all these variables have been checked and the fixture still

does not operate as specified, contact your local Lithonia Lighting distributor.

TWP Back Housing

1-1/2"

18-1/2"

1"from

wall

7 1/2"

Figure D

Drill two places

for 10-24 fasteners

(by others)

Figure E

Figure F

• The fixture is