Acuity Brands Lighting Lithonia Lighting TWP LED 20C 700 40K T3M MVOLT DDBXD Instrukcje instalacji - Strona 4
Przeglądaj online lub pobierz pdf Instrukcje instalacji dla Sprzęt oświetleniowy Acuity Brands Lighting Lithonia Lighting TWP LED 20C 700 40K T3M MVOLT DDBXD. Acuity Brands Lighting Lithonia Lighting TWP LED 20C 700 40K T3M MVOLT DDBXD 4 stron.
Drukuj stronęInstallation Instructions
TWP-LED
Wire Guard
WALL MOUNT:
1. Drill wall in two places for two
(2) 10-24 fasteners (not provided)
per drilling detail (Figure D).
2. Place wire guard over fixture.
3. Secure in place with fasteners
from step 1.
FIXTURE MOUNT:
1. Drill fixture per drilling de-
tail (Figure E). NOTE: Remove
photoelectric cell (when provided)
before drilling for fixture mounted
wire guard.
2. Place wire guard over fixture.
3. Secure in place with two (2) 10-
24 fasteners, washers, and spacers
(provided) as shown (Figure F).
Troubleshooting: If this fixture fails to operate properly, check to make sure: • The fixture is wired correctly.
grounded correctly.
• The line voltage at the fixture is correct. If all these variables have been checked and the fixture still
does not operate as specified, contact your local Lithonia Lighting distributor.
TWP Back Housing
1-1/2"
18-1/2"
1"from
wall
7 1/2"
Figure D
Drill two places
for 10-24 fasteners
(by others)
Figure E
Figure F
• The fixture is