Crow EDS-3000 Petunjuk Instalasi dan Panduan Pengguna - Halaman 15
Jelajahi secara online atau unduh pdf Petunjuk Instalasi dan Panduan Pengguna untuk Aksesori Crow EDS-3000. Crow EDS-3000 20 halaman. Outdoor double optics pir + mw detector with pet immune
Halaman Cetak
• Place the top cover to the base and close it using the bottom screw.
9
Operation
Note!
Connect the EDS-3000 to a positive Voltage output of 9.6 -16VDC source.
Use only a listed power limited source.
alarm shop
The detector shall be provided with minimum of 4 hours of standby power from either a
listed compatible control unit or power supply.
The detector is automatically operated once connected to power.
The LED starts flashing for 30 seconds during the setup period and after that it will turn off.
At this time the detector is ready for operation.
15