Crow EDS-3000 설치 지침 및 사용자 설명서 - 페이지 15

{카테고리_이름} Crow EDS-3000에 대한 설치 지침 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Crow EDS-3000 20 페이지. Outdoor double optics pir + mw detector with pet immune

• Place the top cover to the base and close it using the bottom screw.

Operation

Note!

Connect the EDS-3000 to a positive Voltage output of 9.6 -16VDC source.

Use only a listed power limited source.

The detector shall be provided with minimum of 4 hours of standby power from either a

listed compatible control unit or power supply.

The detector is automatically operated once connected to power.

The LED starts flashing for 30 seconds during the setup period and after that it will turn off.

At this time the detector is ready for operation.