Dill 1502 Manual - Halaman 7
Jelajahi secara online atau unduh pdf Manual untuk Sistem Kontrol Dill 1502. Dill 1502 16 halaman. Tpms trailer kit
Halaman Cetak
2.10 Apply soap suds or commercial leak detection solution on the valve tip,
grommet / rim seal. If no leakage is found, install the valve cap. Other
wise, re-inspect and resolve leak issue.
2.11 Dynamically balance the wheel before it is put back on the vehicle.
3.0 System Overview
The TPMS trailer kit monitors tire pressure and temperature. It will provide
warnings about abnormal conditions such as low pressure, high pressure,
and high temperature.
3.1 System Components
DISPLAY
UNIT
EXTERNAL
ANTENNA
(IF NEEDED)
3.2 How the System Works
A transmitter connected to a valve stem is installed in each wheel,
which monitors pressure and temperature conditions inside each
tire of the vehicle. This data is wirelessly sent to the receiver that is
installed on the vehicle. The receiver displays the pressure and
temperature for each tire position.
detected, the display will alert the driver.
FIGURE 5
FIGURE 6
TRANSMITTER
WITH VALVE
DISPLAY MOUNT
7
12V DC POWER
CORD & HARD-
CONNECTION
ANTENNA
When an abnormal condition is
WIRE