Dill 1502 Manual - Halaman 9
Jelajahi secara online atau unduh pdf Manual untuk Sistem Kontrol Dill 1502. Dill 1502 16 halaman. Tpms trailer kit
Halaman Cetak
3.3 Normal Monitoring
3.3.1 Stationary State:
The transmitter will transmit tire pressure and temperature data to the
display at 2-minute intervals. As the data is received, the display will
refresh.
3.3.2 Moving State:
The inertial switch of transmitter is on when the speed exceeds
16mph.
The transmitter will transmit tire pressure and temperature data to the
display at 30-second intervals. As the data is received, the display
will refresh.
3.4 Warnings
3.4.1 Low Pressure Warning
If the pressure in a tire is 20% lower than the cold inflation pressure
setting, then the following will occur:
1. The display will show the pressure of the abnormal tire and the dig-
its will flash.
2. An audible alert warning sound will be heard.
3. The abnormal icon will show up.
4. The system will only display the abnormal tire. By pressing "SET"
or "R/D", you can temporarily view other tires.
The system will not return to normal monitoring until the
problem(s) is corrected.
3.4.2 High Pressure Warning
If the pressure in a tire is 30% higher than the cold inflation pressure
setting, then the following will occur:
1. The display will show the pressure of the abnormal tire and the dig-
its will flash.
2. An audible alert warning sound will be heard.
3. The abnormal icon will show up.
4. The system will only display the abnormal tire. By pressing "SET"
or "R/D" you can temporarily view other tires.
The system will not return to normal monitoring until the
problem(s) is corrected.
9