Dillenger KD218 Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Monitor Dillenger KD218. Dillenger KD218 11 halaman. Colour lcd display

Display settings continued

- Wheel

You can change the wheel size setting to match the wheel size on your bike, so that you get accurate

speed and distance readouts. The default setting is 26".

- Speed Limit

The default value of the speed limit setting depends on the kit or bike you have, but you can change

the speed limit setting to suit your needs using this parameter setting.

- Battery info

This display can give more detailled information about the battery, but this is only applicable if the

controller in your e-bike or conversion kit conveys this information to the display. Not all controllers

are able to convey this kind of information, so this setting might not be useable on your setup.

- Error Code

This option shows a history of the error codes that the display has reported, which can be used for

diagnostics and fault finding.

Advanced settings

- Power Set

With this setting you can choose the number of PAS levels you would like to use. The default value is

0-9, but you can choose from: 0-3, 1-3, 0-5, 1-5, 0-7, 1-7, 0-9, 1-9

- Set Voltage

To get an accurate battery level indication you can change the voltage setting here to match the

voltage of the battery on your bike.