Dillenger KD218 Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Monitor Dillenger KD218. Dillenger KD218 11 halaman. Colour lcd display

Advanced settings continued

- Dormancy

This setting determines after how much time the display will switch off automatically if it's not been

in use. The default setting is 5 minutes.

- SOC View

With this setting you can choose the way the battery level indication is represented. The default value

is percentage, but you can also change it to a bar representation.

- LCD Luminance

This adjusts the brightness of the LCD display. The default setting is 100%, but you can turn the

brightness down using this setting.

- Password set

You can use this to set a password for the display. The set password will have to be put in each time

the display turns on, and without the correct password the display will not be operable.

To set a password, change Start PassWord to "ON" and the display will prompt you to set a password

consisting of 4 digits. You use the + and - buttons to select each number, and shortly press the

on/off button to move onto the next number. The password then has to be confirmed for it to

be activated, as shown in the graphic below:

If you do choose to use a password it is very important to take note of it, as the display is inoperable

without the correct password. For this reason it's generally not recommended to set a password, and

doing so is at your own risk