Dillon GTS-1000 Panduan Operator - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Operator untuk Peralatan Uji Dillon GTS-1000. Dillon GTS-1000 16 halaman.

Crosshead

The crosshead has six mounting holes for attaching a gauge with twin 2.25 inch (57

mm) hole spacing. The maximum stand capacity is dependent upon which position the

force gauge is mounted to.

Gauge mounting position

A (closest to column)

B (middle)

C (furthest from column)

Three 15-pin connectors are on the rear of the stand.

Position

Top (n/c)

Middle (GTX)

Bottom (PC)

Overview of controls

The GTS-1000 front console has three basic

sections:

#1 Operating mode

#2 Test speed

#3 Move

Additional controls include:

Emergency stop button (above console)

Crosshead travel limit switches (on column)

On/off power switch (at rear of stand)

Throat opening

2.64 inch / 67 mm

3.82 inch / 97 mm

5.00 inch / 127 mm

Use

No connection. Factory and dealer use only.

Connect to a Dillon GTX force gauge for stand reverse/stop control

on sample break or compression overload.

Sends the GTX serial information to a computer when the stand

reverse/stop cable above is used.

expansion boxes required by other brands.

Maximum stand capacity

1000 N / 220 lbf / 100 kgf

750 N / 165 lbf / 75 kgf

500 N / 110 lbf / 50 kgf

The PC port eliminates Y-cables or