AEMC instruments FlexProbe 24-3001 Panduan Pengguna - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Alat Ukur AEMC instruments FlexProbe 24-3001. AEMC instruments FlexProbe 24-3001 17 halaman. Flexible ac current probe
Halaman CetakRead the instruction manual completely and follow all the safety
information before attempting to use or service this instrument.
Wear protective clothing and gloves as required.
Use caution on any circuit: potentially high voltages and currents
may be present and may pose a shock hazard.
probe. Never exceed the maximum voltage ratings given.
Safety is the responsibility of the operator. The FlexProbe
must be
®
ALWAYS de-energize the circuit before wrapping the FlexProbe
®
around bare conductors, bus bars, or near live parts. Do not wrap on
live conductors.
ALWAYS connect the electronic module to the display device before
wrapping the FlexProbe
around the sample being tested.
®
ALWAYS inspect the module, sensor, sensor cable, and output termi-
nals prior to use. Replace any defective parts immediately. Use only
factory parts.
NEVER use the FlexProbe
on electrical conductors rated above
®
1000V CAT III and 600V CAT IV.
GlobalTestSupply
www.
.com
Find Quality Products Online at: