AEMC instruments FlexProbe 24-3001 사용자 설명서 - 페이지 4
{카테고리_이름} AEMC instruments FlexProbe 24-3001에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEMC instruments FlexProbe 24-3001 17 페이지. Flexible ac current probe
페이지 인쇄Read the instruction manual completely and follow all the safety
information before attempting to use or service this instrument.
Wear protective clothing and gloves as required.
Use caution on any circuit: potentially high voltages and currents
may be present and may pose a shock hazard.
probe. Never exceed the maximum voltage ratings given.
Safety is the responsibility of the operator. The FlexProbe
must be
®
ALWAYS de-energize the circuit before wrapping the FlexProbe
®
around bare conductors, bus bars, or near live parts. Do not wrap on
live conductors.
ALWAYS connect the electronic module to the display device before
wrapping the FlexProbe
around the sample being tested.
®
ALWAYS inspect the module, sensor, sensor cable, and output termi-
nals prior to use. Replace any defective parts immediately. Use only
factory parts.
NEVER use the FlexProbe
on electrical conductors rated above
®
1000V CAT III and 600V CAT IV.
GlobalTestSupply
www.
.com
Find Quality Products Online at: