Epson TM-L90 series Panduan Manufaktur - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Manufaktur untuk Aksesori Printer Epson TM-L90 series. Epson TM-L90 series 22 halaman. Attaching cover on the power switch
Juga untuk Epson TM-L90 series: Brosur (1 halaman), Brosur (2 halaman), Panduan Produk (27 halaman), Spesifikasi (2 halaman), Spesifikasi (8 halaman), Manual Informasi (5 halaman), Spesifikasi (4 halaman), Panduan Pengguna (40 halaman), Panduan Pengguna (17 halaman), Panduan Pengguna (21 halaman), Panduan Pengguna (21 halaman), Mulai di sini (2 halaman), Mulai di sini (2 halaman), Manual (13 halaman), Petunjuk Manual (12 halaman), Panduan Pengguna (36 halaman), Panduan Pengembangan (34 halaman), Manual (2 halaman)

Halaman Cetak

1. Automatic Paper Layout Setup

Confidential

3.12 Requirements for Black Mark Position II

The black mark positions on the paper to be manufactured must meet the requirements in the

figure below. (The ESC/POS commands expand the settable range, omitting the margin settings

or the limitation on use (NOTE 2 of Section 3.6).) The reflective rates of each portion (1), (2),

and (3) must meet the combinations shown in the table below (the reflective rate is measured

using the back of the paper, the non-printing side):

• Black mark portions must be printed on the back of paper (non-printing side).

Reflective rate of black mark portion

(1)

Reflective rate of the portion where

the black mark does not exist (2) (3)

NOTE: Reflective rates are measured by the Macbeth PCM-II (Filter D) meter.

If label paper meets Black Mark Position Requirement I, it is not necessary to consider

Black Mark Position Requirement II.

Preprintable area

The black mark is in the position between labels, but does not cover the entire interval.

(3)

Back (non-printing side)

TITLE

TM-L90

Roll Paper

Manufacturing Guide

17%

16%

15%

90%

85%

80%

0.5 ± 0.3

5 ± 0.5

(4)

0.5 ± 0.3

15 or more

(The dotted lines indicate

the position of the label.)

(2)

(1)

SHEET

REVISION

14%

13%

75%

70%

[Units: mm]

NO.

SHEET

Less